
ANPING COUNTY HAIFENG METAL MESH CO., LTD.
Phone: +86-13784889023
Fax: +86-318-7712088
Add: Yuanxi Economic Zone, Anping, Hengshui, Hebei, China
Phone: +86-13784889023
Fax: +86-318-7712088
Add: Yuanxi Economic Zone, Anping, Hengshui, Hebei, China
Products
Geotextile Cloth
Geotextiles are used with gabion baskets to prevent movement of soil particles through or underneath the gabion structure, horizontally or vertically and preventing subsidence.
Geotextiles are relatively recent but provided good results to prevent beach from
retreating. Plus they are very flexible and can be re-arranged if their configuration does
not provide good results.
![]() |
![]() |
Non-woven Geotextile
Introduction:1. Short Fiber and Polyester as raw material, non-woven geotextile;
2. Manufactured with special technics: carding cross-laying equipment and prickling equipment.
Features:
1. Super performance: corrosion resistant, acid resistant, aging resistant;
2. High strength, water permeability, filterableness and durability;
3. Easy construction: low weight, easy operation, simple construction
Function:
Isolation, filteration, drainage, reinforcement and protection.
Application:
Widely used in the areas of railway, highway, water conservancy, subway etc.
![]() |
Technical Specification:
| No | Item/Specification | 100 | 150 | 200 | 250 | 300 | 350 | 400 | 450 | 500 | 600 | 800 | Note |
| 1 | ratio deviation, % | -8 | -8 | -8 | -8 | -7 | -7 | -7 | -7 | -6 | -6 | -6 | |
| 2 | Thickness, mm, ¡Ý | 0.9 | 1.3 | 1.7 | 2.1 | 2.4 | 2.7 | 3.0 | 3.3 | 3.6 | 4.1 | 5.0 | |
| 3 | Amplitude deviation, % | -0.5 | |||||||||||
| 4 | Breaking strength. KN/m ¡Ý | 2.5 | 4.5 | 6.5 | 8.0 | 9.5 | 11.0 | 12.5 | 14.0 | 16.0 | 19.0 | 25.0 | |
| 5 | Breaking elogation, % | 25~100 (Vertical and Latitudinal) | |||||||||||
| 6 | CBR bursting strngth, KN ¡Ý | 0.3 | 0.6 | 0.9 | 1.2 | 1.5 | 1.8 | 2.1 | 2.4 | 2.7 | 3.2 | 4.0 | |
| 7 | Equifinal aperture mm | 0.07-0.2 | |||||||||||
| 8 | Vertical permeability coefficient, cm/s | KKx(10-4~ 10-3) | K=1.0~9.9 | ||||||||||
| 9 | Ripping strength, KN | 0.08 | 0.12 | 0.16 | 0.20 | 0.24 | 0.28 | 0.33 | 0.38 | 0.42 | 0.46 | 0.60 | |



